74’ 1.3 dual chamber master brake cylinder
Moderators: ClaytonSpeed, balmy
- btorvestad
- Posts: 42
- Joined: Fri Jun 22, 2012 11:34 am
74’ 1.3 dual chamber master brake cylinder
I am having issues with my brakes where the pedal almost bottoms out quite frequently but I still have decent braking effect. With 1 pump I have full effect. Thinking it is the master brake cylinder. Is this a common issue? I am struggling to find the right cylinder assembly to purchase so if someone know where to get it or can tell me the part number of these it would be appreciated. It is the dual chamber version for servo and it is not the same as mentioned in the other recent thread on master brake cylinder. Single chamber seems easier to get hold off.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: 74’ 1.3 dual chamber master brake cylinder
If the pedal travels to the floor on some occasions but is good at other times then it is definitely the master cylinder. It can fail to hold pressure even when not losing fluid.
We can get them stainless sleeved which is a better long term cure than a new cylinder which will still rust.
Best luck.
We can get them stainless sleeved which is a better long term cure than a new cylinder which will still rust.
Best luck.
- MarinaCoupe
- Posts: 10193
- Joined: Thu May 31, 2007 5:26 pm
- Location: Bedford
- Contact:
Re: 74’ 1.3 dual chamber master brake cylinder
It’s not a common problem for Marinas, but age will always degrade internal rubber seals and yours could be 44 years old. Hydraulic fluid is hygroscopic which means that it absorbs moisture from the atmosphere. The water/fluid mix lays in the master cylinder and rust pits form in the cylinder wall. When you start using the brakes, the rust rips the rubber seals and the brakes lose the pedal pressure.
As Kilroy says, it is possible to have the master cylinder reconditioned and lined with a stainless steel sleeve, which doesn’t rust.
As Kilroy says, it is possible to have the master cylinder reconditioned and lined with a stainless steel sleeve, which doesn’t rust.
- btorvestad
- Posts: 42
- Joined: Fri Jun 22, 2012 11:34 am
Re: 74’ 1.3 dual chamber master brake cylinder
Thanks guys. I will check to see if someone in the area can do that work. With current labour cost I have a feeling that it can be quite expensive though. In case I decide to buy a new one I see that Earlpart had it in theie catalogue. Does anyone know who have this stock now after they shut down?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- enthusiastic youth
- Posts: 128
- Joined: Fri Dec 06, 2013 12:13 pm
- Location: Norway, Gjøvik.
Re: 74’ 1.3 dual chamber master brake cylinder
My TC has had a replacment one fitted before I got it. Not sure what the part number is for it....
I do know who supplied it tough.
I do know who supplied it tough.
My cars:
1975 Marina Coupe TC, ’’citron yellow’’.
1972 Dodge Charger Rallye, 440 Magnum
2002 Subaru Forester, daily driver.
1975 Marina Coupe TC, ’’citron yellow’’.
1972 Dodge Charger Rallye, 440 Magnum
2002 Subaru Forester, daily driver.
-
- Posts: 1457
- Joined: Thu May 26, 2016 11:00 pm
Re: 74’ 1.3 dual chamber master brake cylinder
David Kingerley of Obsolete Car Spares supposedly bought the stock.btorvestad wrote: ↑Fri Jun 15, 2018 7:14 pm Thanks guys. I will check to see if someone in the area can do that work. With current labour cost I have a feeling that it can be quite expensive though. In case I decide to buy a new one I see that Earlpart had it in theie catalogue. Does anyone know who have this stock now after they shut down?
Sent from my iPhone using Tapatalk
http://www.obsoletecarspares.co.uk/
- MarinaCoupe
- Posts: 10193
- Joined: Thu May 31, 2007 5:26 pm
- Location: Bedford
- Contact:
Re: 74’ 1.3 dual chamber master brake cylinder
David supplied an Ital one the other day, so it’s likely he’s got one.
- btorvestad
- Posts: 42
- Joined: Fri Jun 22, 2012 11:34 am
Re: 74’ 1.3 dual chamber master brake cylinder
Perfect! Thanks
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk