Prop centre bearing mount.

**Topics directly related to Marinas and Itals**

Moderators: ClaytonSpeed, balmy

Daveylozzy
Posts: 26
Joined: Tue Mar 12, 2019 2:39 pm

Prop centre bearing mount.

Post by Daveylozzy » Sun May 26, 2019 7:45 pm

Hello all,
I notice that the centre mount rubber/bearing mount has come adrift from the bracket and i wondered if there is a modern fix for this. From memory isn't the centre bearing 30mm? Again any advise is much appreciated?

david painter
Posts: 1704
Joined: Sat Nov 24, 2012 3:52 pm

Re: Prop centre bearing mount.

Post by david painter » Sun May 26, 2019 8:26 pm

Several usually listed on ebay Same as a Triumph Dolomite Rimmer Bros list them
Dave

Daveylozzy
Posts: 26
Joined: Tue Mar 12, 2019 2:39 pm

Re: Prop centre bearing mount.

Post by Daveylozzy » Mon May 27, 2019 11:11 pm

Thanks. As you say Rimmer Bros and eBay and a nos one on eBay

User avatar
timspencer
Posts: 775
Joined: Fri Oct 23, 2015 11:17 am

Re: Prop centre bearing mount.

Post by timspencer » Tue Jun 04, 2019 3:59 pm

I have a complete used prop with a good centre bearing free if anyone wants it

User avatar
locost_bryan
Posts: 3086
Joined: Fri May 22, 2009 2:43 am
Location: Auckland, New Zealand

Re: Prop centre bearing mount.

Post by locost_bryan » Thu Feb 18, 2021 9:37 pm

Is it 37H8019, or CB49?
Bryan
Auckland NZ

1972 Morris Marina 1750 TC Coupe "Ozzy"

User avatar
Gee tc
FMM Supporter
FMM Supporter
Posts: 1186
Joined: Sun Jun 10, 2007 9:36 am
Location: Chester

Re: Prop centre bearing mount.

Post by Gee tc » Wed Mar 03, 2021 8:54 am

Rumour stated earlier Ford transit bearing was similar and adaptable.
On my list of mods to try...


Post Reply