Prop centre bearing mount.
Moderators: ClaytonSpeed, balmy
-
- Posts: 26
- Joined: Tue Mar 12, 2019 2:39 pm
Prop centre bearing mount.
Hello all,
I notice that the centre mount rubber/bearing mount has come adrift from the bracket and i wondered if there is a modern fix for this. From memory isn't the centre bearing 30mm? Again any advise is much appreciated?
I notice that the centre mount rubber/bearing mount has come adrift from the bracket and i wondered if there is a modern fix for this. From memory isn't the centre bearing 30mm? Again any advise is much appreciated?
-
- Posts: 1705
- Joined: Sat Nov 24, 2012 3:52 pm
Re: Prop centre bearing mount.
Several usually listed on ebay Same as a Triumph Dolomite Rimmer Bros list them
Dave
Dave
-
- Posts: 26
- Joined: Tue Mar 12, 2019 2:39 pm
Re: Prop centre bearing mount.
Thanks. As you say Rimmer Bros and eBay and a nos one on eBay
- timspencer
- Posts: 775
- Joined: Fri Oct 23, 2015 11:17 am
Re: Prop centre bearing mount.
I have a complete used prop with a good centre bearing free if anyone wants it
- locost_bryan
- Posts: 3086
- Joined: Fri May 22, 2009 2:43 am
- Location: Auckland, New Zealand
Re: Prop centre bearing mount.
Bryan
Auckland NZ
1972 Morris Marina 1750 TC Coupe "Ozzy"
Auckland NZ
1972 Morris Marina 1750 TC Coupe "Ozzy"
Re: Prop centre bearing mount.
Rumour stated earlier Ford transit bearing was similar and adaptable.
On my list of mods to try...
On my list of mods to try...
- MarinaCoupe
- Posts: 10193
- Joined: Thu May 31, 2007 5:26 pm
- Location: Bedford
- Contact: